HobbyKing
SCM 3213 1250KV BRUSHLESS OUTRUNNER
| Battery | 2-3 Lipoly |
| Max Eff | 82% |
| Max Current | 7 to 10A (over 75% efficiency) |
| Int. Resistance | 125mohm |
| 10v no Load current | .7A |
| Dimensions | 25.7 x 26mm |
| Shaft | 3mm |
| Weight | 45g |
| Model Size | up to 300-600g |
| Recommended Prop | 9x5 3S / 10x5 2S |
Kv: 1250rpm/v,
Spec.5 Reviews
HobbyKing
KD36-60-09L 2700KV BRUSHLESS INRUNNER
| Dimensions | 36~60mm |
| Shaft size | 5mm |
| Weight | 260g |
| Idle Current | 3.4A |
| Resistance | .0097 |
| Max Amp | 68A |
Kv: 2700rpm/V,
The KD36 inrunners are equivilent to 540 size motors. Front ...5 Reviews
HobbyKing
ADH30S MICRO BRUSHLESS OUTRUNNER 6100KV
| Weight | 2.6g |
| Size | 17 x 13mm |
| Current | 4.2V/0.4A (No load) |
| Shaft | 1mm |
| Shaft length | 5mm |
| Prop | 3020 |
| Voltage | 4.2V |
| Current | 2.7A |
| Watts | 12.6W |
| Thrust | 34g |
| Efficiency (g/w) | 2.7 |
Kv:6100rpm/v, Max current:2A, Note: Please be careful when using this product. Due to its size and delicate nature it is easy to overload this motor while using a GWS3020 prop. Only use single cell Lithium Polymer batteries and never draw more than 2.7Amps for more than 10 seconds.,
Suitable for LAMA2 and similar micro helicopters. Test data; GWS ...5 Reviews
HobbyKing
1/18 BRUSHLESS 4WD STADIUM TRUCK W/ 18AMP SYSTEM
| Motor | Brushless Inrunner(2030) |
| ESC | 18A Brushless (with Reverse) |
| Battery | 2S LiPo (93x30x13mm MAX SIZE) w/ XT-60 connector [Required] |
| Servo | 15g Micro |
| Traction | Full Time 4WD, Twin Diff |
| Length | 250mm |
| Width | 185mm |
| Height | 110mm |
| Groung Clearance | 20~26mm Adjustable |
| Top Speed | 32km/h on standard system |
5 Reviews
HobbyKing
C2024 MICRO BRUSHLESS OUTRUNNER 1600KV (17G)
| Diameter | 20.2mm |
| Length | 24mm |
| Shaft | 5mm |
| Weight | 17g (with 10cm wire) |
| Power | 80W |
| Resistance | 533 |
| Idle Current | .2A |
| Max amp | 10A (15sec burst) |
| Voltage | 2-4cell Lipoly |
Kv: 1600rpm/v, Turns: 25,
Specifications. We do not have a suggested prop size for ...5 Reviews
HobbyKing
TURNIGY TYPHOON 500H HELI MOTOR 1800KV (500 CLASS)
| Weight | 170g |
| Voltage | 3-6S |
| Max current | 55A |
| Diameter of shaft | 5mm |
| Length of front shaft | 20mm |
| ESC | 65A |
Specifications:, Dimension:, 37mm x 50mm, 71mm(with shaft), Kv:1800rpm/V,
The Turnigy Typhoon is a very serious upgrade for any ...5 Reviews
HobbyKing
HACKER STYLE BRUSHLESS OUTRUNNER 20-20L
| Dimentions | 28x32mm |
| Rating | 1053kv |
| Battery Config | 3 Lipo Cells |
| Shaft | 3.175mm |
| Weight | 56gr |
| Standard Current | 6-15A |
| Max Current | 19A |
5 Reviews
HobbyKing
TURNIGY 6S MINI LIPO BATTERY MONITOR.
| Measuring Voltage | 2.7V ~ 4.5V/cell |
| Measuring Accuracy | 0.01V |
| Current | dispaly on |
| Dimensions | 48x18x8mm |
Functions and Features:, , Battery Applicable:, 2S ~ 6S Lithium battery, Weight : 6g,
Turnigy 6S Mini Lipo Battery monitor. An excellent and very ...5 Reviews
HobbyKing
HOBBYKING SS SERIES 15-18A ESC
| Weight | 15g |
| Size | 24x47x2mm |
| Cells | 2-3S (Auto Detect) |
| Max Current | 15A |
| Burst | 18A |
| Battery setting | LiPo and NiMH |
| Brake | Enable/Disable |
BEC: 1A,
The Hobbyking SS series comes with a limited range of ...5 Reviews
HobbyKing
KD 63-20L BRUSHLESS OUTRUNNER 235KV
| Battery | 8-12S |
| Prop | 22x12 |
| Shaft Size | 8.0mmx24mm |
| Motor Dimensions | 63mmx66mm |
| Weight | 650g |
Kv: 235rpm/v, Max Amp: 69,
5 Reviews
HobbyKing
TURNIGY 3020 BRUSHLESS OUTRUNNER MOTOR 1200KV
| Diameter of shaft | F3mm |
| Battery | 2~3 Cell 3S/11.1V |
| RPM | 1200kv |
| Max current | 6~8A |
| No load current | 7.4V/0.3A |
| Current capacity | 10A/20sec |
| Internal resistance | 0.31ohm |
| Dimensions | 12x30mm |
| Pull | 290~500g |
| Prop | 7x3.5~9x4.7 |
| ESC | 12A |
| Max Current | 8.5A |
| Battery Type | 2~3S Only |
Dimension:, 31mm x 23mm (including mount), Weight:, 25g (kv1200) (not including connectors), Lamination thickness: .,
2mm Spec. Suited for Mini indoor planes.5 Reviews
HobbyKing
C10 MICRO BRUSHLESS OUTRUNNER 2900KV
| Dimension | 17.8mm x 24mm |
| Weight | 7.9g /0.28oz (not including mount) |
| Diameter of shaft | 2.0mm |
| Length of front shaft | 6mm |
| Unload current | 11.1v 0.5A |
| Max Load | 5.1A |
KV: 2900,
*Prop saver not included.5 Reviews
HobbyKing
2213N 800KV BRUSHLESS MOTOR
| Weight | 53g |
| Shaft | 3mm |
| Max Amp | 9.5A |
| RPM/Min | 7250 |
| Thrust | 690g |
| Max Amp | 8.1A |
| RPM/Min | 7605 |
| Thrust | 635g |
5 Reviews
HobbyKing
TURNIGY 480S BL INRUNNER MOTOR W/ IMPELLER 3200KV
| Diameter of shaft | 4mm |
| Length of front shaft | 13mm |
| Battery | 3 Cell 3S/11.1V |
| RPM | 3200kv |
| Max current | 60A |
| No load current | 2.8A |
| Internal resistance | 22.3ohm |
| Data | 3S 11.1V |
| Prop | 4.75x4.75, 5.5x4.5 |
| Max Current | 38.5A, 50A |
| Pull | 700g, 900g |
| ESC | 60A |
| Battery Type | 3S Only |
Dimension:, 47mm x 30mm, 60mm(with shaft), Weight:, 109g (kv3200) (not including connectors), Lamination thickness: .,
2mm Spec.5 Reviews
HobbyKing
TURNIGY ACCUCEL-8 150W 7A BALANCER/CHARGER
| Operating voltage range | 11.0~18.0Volt |
| Circuit power | max. 150W |
| Charge current range | 0.1~7.0A |
| Discharge current range | 0.1~5.0A |
| NiCd/NiMH battery cell count | 1~27 cells |
| Lithium bettery cell count | 1~8 Series |
| Pb battery voltage | 2 to 36V |
| Weight | 625g |
| Dimensions | 170X125X35mm |
| Note | Power supply not included. |
"CONNECTION BREAK" : This indicates you need to have the discharge AND balance plugs connected. This unit charges through the discharge wires and balances through the balance wires. Connect all wires or you will get a "CONNECTION BREAK" message.,
The Accucel-8150 is a Lipoly/LiFe battery charging workhorse. Capable of ...5 Reviews